Motor Graders

Max Hire’s Motor Grader fleet are delivered ready to work. The Cat 12H, 140H and 140M graders are registered for road use and the 14H and 16H graders are fully mine spec’d ready for mine or major construction operations. Registration is available on the larger models by request. Graders are available with Trimble GCS9000 Systems for both rough grading and final trim down to 5mm with fewer passes.

Standard

 Air Conditioned Cab
 AM/FM Radio
 Rear Rippers
 Road Registration (12H, 140H & 140M)

 Attachments

 Trimble control & guidance system

 Free roll roller


 Optional Extras

 Fast Fill Fuel systems (14H & 16H)
 Mine spec on smaller units
 Road Registration (14H & 16H)

 Max Safety

 UHF Radios
 First aid kits
 Fire Extinguishers
 Rotating beacons
 E-stops (14H & 16H)
 Dual pole isolators (14H & 16H)
 Fully maintained
 Service History Report
 Risk Assessments
 Operators Manual

  MOTOR GRADER Range

Model

Blade Size

 CAT 12H  2.0 m3
 CAT 928  2.1 m3
 CAT 950  2.9 m3
 CAT 962  3.3 m3
 CAT 966  4.0 m3
 CAT 972  4.3 m3
 CAT 980  5.7 m3
 CAT IT 28G  2.0 m3
 CAT IT 38G  2.4 m3
 CAT IT 62G  3.3 m3

Bucket width is a guide only. Individual machines should be checked before transport

FUEL CONSUMPTION IN LITRES
 Approximate fuel usage in Ltr / hr

Model

Low

Medium

High

12H 9 16 23
140H 9 17 25
14H 13 24 32
16H 17 129 40

LOAD FACTOR GUIDE
Low
: Light maintenance or finishing work, frequent periods of idling
Medium: Normal operation in average conditions, 50 to 75% of work cycle
High: Heavy operation with steep grades, hard material etc, high work cycle

Note: The above lists general fuel rates (i.e fuel burned per hour) based on the above load factors. Machine utilization and job efficiency should be used in conjunction with these load factors to properly evaluate fuel consumption.